Will new rack connect to the system I already have?

Usually, if the connection matches, but "teardrop" is not universal across manufacturers. Send photos of the upright face, beam connector and any label so we can identify matching components before you order. For your Georgetown building, we use the actual floor plan and load data rather than a catalog assumption.

How does lift-truck type affect aisle width?

Aisle width is set by the lift truck: counterbalance trucks need approximately 12–13 feet, reach trucks 8–10 feet, and very-narrow-aisle equipment 5–6 feet. We confirm the requirement against your truck and load; aisle width has a major effect on storage density.

Do you install pallet rack?

Yes. We handle design, supply and installation through experienced installation crews we schedule and manage. The system is anchored to the floor, aligned and capacity-tagged to the approved layout.

How do you determine rack load capacity?

There is no single rack capacity: beam capacity is per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet, and capacities go on load plaques.

Which rack dimensions fit my pallets?

For standard 48-inch-deep pallets, 42-inch-deep uprights are the usual starting point; common beam lengths are 96 inches for two 40-inch pallets, 108 inches, and 144 inches for three. Rack height follows clear height and forklift lift height. Measure your actual pallets, including overhang, before choosing dimensions.

Pushback Rack system inside a Kentucky warehouse

Georgetown, Kentucky

Pushback Rack in Georgetown, KY

Name: Louisville Pallet Racks — Georgetown
Address: 6844 Bardstown Rd. Unit #2687, Louisville, KY, 40291, US
Telephone: (502) 521-1485
Price range: $$

A lot of the calls we get from Georgetown start with a mixed manufacturing-and-distribution floor fighting over the same square footage. Push back racking usually fixes it, because it changes how much of a Cherry Blossom Way floor plate is actually available to store product without moving a wall.

With fewer aisles maintained for the same forklift fleet on the table, the metal stamping and fabrication operations we work with near Cherry Blossom Way usually want cost per pallet position, not a lump sum. That is what the pushback rack layout and itemized quote for a Cherry Blossom Way building show. Call (502) 521-1485 to start one for Georgetown.

(502) 521-1485

Why Georgetown Warehouses Work With Us

The industrial stock near Georgetown industrial corridor ranges from older infill space to newer construction, and each one limits a racking plan differently. Height, columns, and floor condition all move the answer in Georgetown.

Since 1997 we have supplied automotive assembly and supply, metal stamping and fabrication, and 3PL operations across Georgetown and the surrounding area through Warehouse Equipment & Supplies Co. The consult up front, where we talk through lanes two to six pallets deep served from a single aisle, is why the first layout is usually close to the final one.

Service does not stop at handoff on a Georgetown job either. If a pushback rack level needs to move in your Cherry Blossom Way building or you need another bay, the same team that designed the system answers the phone.

Free warehouse consultation

CAD layout with position counts

Installation by experienced crews we schedule and manage

High-density pushback rack lanes loaded with pallets

Pushback pallet racking showing cart rails and load beams

Operations We Rack Around Here

Nearby areas we work in regularly include Georgetown industrial corridor, Cherry Blossom Way, Triport Road area, Scott County business park.

Automotive assembly and supply

Metal stamping and fabrication

Plastics and injection molding

Logistics support

How Pushback Rack Works

Two to six pallets deep from one aisle, without giving up much reach.

Loading from the aisle

The driver sets the first pallet on the front cart. Each pallet added after that pushes the cart train deeper into the lane, so one aisle handles the whole depth.

Carts nested on rails

Steel carts with nylon or steel wheels ride inclined rails, each nesting under the one ahead of it - that nesting is what makes multi-deep storage possible from a single face.

Retrieval by gravity

Pull the front pallet and the next cart rolls forward on the incline to the pick face. No driving into the lane, no repositioning pallets by hand.

Last in, first out

Each lane runs LIFO. That suits fast-turning product and any operation managing rotation by lane rather than by individual pallet date.

What a Pushback Rack Project Includes

We start by understanding the automotive assembly and supply side of your operation — pallet profile, equipment, clear height, SKU count, throughput — because those inputs decide pushback rack capacity in a Georgetown industrial corridor building long before steel is quoted.

Next comes the pushback rack layout itself — every position counted, every level rated, and the Georgetown quote itemized by frame, beam, deck, and accessory. Because lanes two to six pallets deep served from a single aisle changes the math, a second configuration on the same floor plan usually comes with it for comparison.

Pushback Rack lead time is confirmed on your quote, and we time deliveries to your Georgetown receiving schedule. Experienced installation crews we schedule and manage follow the drawing, with the system anchored to the floor and capacity-tagged. The layout stays on file for expansion.

Two to six pallets of the same SKU stacked in one lane

Cold storage or leased space where rent per square foot is steep

Operations trimming aisle count to add positions

Beverage, packaging, and consumer goods runs

Buildings with clear height to spare but limited floor

Call (502) 521-1485

Recent Installations

Racking projects completed for warehouses across Greater Louisville and Southern Indiana.

Carton flow rack lanes installed beneath pallet rack bays

Drive-in pallet rack system installed in a warehouse

Tall selective pallet rack rows with wire decking

Selective pallet rack aisle with wire decking in a distribution center

New pallet rack rows installed in an open warehouse

Green and orange selective pallet rack rows along a warehouse wall

Multiple rows of selective pallet rack with wire decking

Pallet rack rows installed across a warehouse floor

Cantilever rack columns with orange arms installed against a wall

Push back pallet rack carts and rails in a cold storage room

View More Projects

Get a Pushback Rack Quote for Your Georgetown Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (502) 521-1485.

Louisville Pallet Racks

6844 Bardstown Rd.

Unit #2687

Louisville, KY 40291

(502) 521-1485

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Louisville Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.

Pushback Rack Questions We Hear Most

Other Rack Types We Supply in Georgetown

Pallet Rack

Every pallet reachable, every time. The baseline we size everything else against.

View details

Pallet Flow Rack

Load one side, pick the other, and let gravity enforce first in, first out.

View details

Drive-In Rack

No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.

View details

Cantilever Rack

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

View details

Carton Flow Rack

Cases advance to the picker instead of the picker hunting for cases.

View details

Nearby Areas We Also Serve

Our delivery and installation territory covers Greater Louisville and Southern Indiana, so one team can handle multiple buildings for the same company.

Pushback Rack in Louisville Pushback Rack in Jeffersontown Pushback Rack in Shepherdsville Pushback Rack in Elizabethtown Pushback Rack in Shelbyville Pushback Rack in Frankfort

View All Service Areas

Where We Work

Located in Louisville, we serve the entire Greater Louisville region with industrial pallet racks and warehouse storage solutions.

Louisville Pallet Racks

Address

6844 Bardstown Rd.
Unit #2687
Louisville, KY 40291

Phone

(502) 521-1485

Business Hours

Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed

Need Pushback Rack in Georgetown?

Call (502) 521-1485 or request a quote and we will get a layout started.

(502) 521-1485